| BRAVO chamber autoclave |
The ultimate STATIM companion
Bravo benefits |
- Optional Printer
- Fast cycle times
- Fractionated vacuum system
- Closed door drying with Dri-TecV technology
- Single use Pull’n Push water system
- Easy to use – single button operation
- Conforms to international and national standards
- Integrated printer option
- Patented door locking mechanism and steam generation
system
- 17 or 21L chamber capacity
- 120V or 220V options
|
The Bravo is a fractionated vacuum sterilizer that incorporates
both pre-vac (to remove air) and post-vac (to help drying) cycles to
ensure perfect steam penetration for any load. Bravo is true to the
STATIM reputation for speed, providing rapid cycles for unwrapped
instruments. |
Dri-TecV - Vacuum drying
technology
The SciCan Dri-TecV drying system
provides a perfectly dry load every time. In addition, Bravo’s large
capacity allows the office to quickly process three wrapped
full-size cassettes or up to fifteen pouches.
Unlike many other simple chamber autoclaves, the Bravo uses only
fresh distilled water for every cycle. The unit has been designed
for the option to pull clean distilled water from a container as far
as six feet away and then push the used water directly to the drain,
freeing up valuable time for your staff.
The Bravo comes in three models to suit the most far ranging
requirements. The table below outlines the difference between the
units and differences in loads and cycles times. |
Sterilization cycle description chart |
|
Cycle times
(including drying)1 |
|
Cycles
(134°C for
4 minutes) |
17 |
17V |
21V |
Acceptable materials to process |
| Porous/wrapped |
40 |
35 |
40 |
Wrapped hollow2 instruments,
porous materials |
| Hollow/
unwrapped |
35 |
27 |
32 |
Unwrapped hollow2 instruments
(handpieces, phaco, etc.) |
| Solid/wrapped |
30 |
24 |
28 |
Wrapped solid instruments |
| Solid/unwrapped |
22 |
19 |
23 |
Unwrapped solid
instruments |
|
|
1 Cycle times represent 220V units.
Cycle times for 110V units estimated up to 7 minutes
longer.
2 Hollow instruments type “A” and “B”
according to EN 13060:2004 (ie. dental handpieces, Phaco
instruments, trocars, rigid scopes, etc.) |
|
Accessories
- 47200010000 Biological filter, Bravo
- 01-111729 Data logger (G), Bravo
- 48000050000 Door gasket
- 110000003W0 Drain pipe, Bravo
- 47300070000 External clean water tank
- 47300060000 External waste water tank
- 25600000400 Mounting feet, Bravo
- C1BP58301AY Rack chamber Bravo
- 17(V)C1BG53401AY Rack chamber Bravo
- 21VSCBP0010000 Thermal paper
- C1XP076000Y Tray 17/17V Bravo
- C1BG345000Y Tray 21V Bravo
- STXX0080000 Tray extractor, Bravo
- 47200040000 Water debris filter, Bravo
- A0XP0010000 Water filling jug
- 01-111774S Water in-take pull kit
- 01-111775S Direct-to-drain kit
|
>Full Brochure and Specifications (PDF File in new window)
>Specifications and Comparison Chart
|
BRAVO17 |
BRAVO 17V |
BRAVO
21V |
Unit size
|
L 560
mm W 480 mm H 420 mm
L 22.0” W 19.0” H 16.5” |
L
560mm W 480mm H 420mm
L 22.0” W 19.0” H 16.5” |
L 635mm W 480mm H 445mm
L
25.0” W 19.0” H 17.5” |
| Chamber volume |
17L /
4.5 Gal |
17L /
4.5 Gal
|
Chamber volume 21L / 5.5
Gal |
| Chamber dimensions |
D 254
mm x L 343 mm
D 10” X 13.5” |
D
254mm x L 343mm
D 10” X 13.5”
|
D 254 mm x L 445 mm
D 10” X
17.5” |
| Weight (without water) |
55kg /
121lbs |
58kg /
128lbs |
63kg / 139lbs |
| Electrical rating |
120V,
60Hz, 15A, 1700W
|
120V,
60Hz, 15A, 1700W
|
120V, 60Hz, 15A,
1700W
|
|
Product number: ST16240
Base Price (Bravo 17, No Printer): US$6,630.00
|
|
Select
|
|
The world’s favorite handpiece autoclave
>Statim Products Overview (PDF File in new window)
|
- Ultra-fast 6 minute unwrapped cycle
- 14 minute wrapped cycle
- Exceptional instrument turnover
- 10 minute Dri-TecC drying technology
- Single use water
- Aseptic transfer of instrument directly to the
point-of-use
- Reduced instrument investment
- Prolongs instrument life
|
STATIM
2000 benefits
Like the STATIM 900, the STATIM 2000 boasts a 6-minute cycle, but
has the added advantage of employing a fully removable chamber so
you can aseptically transport a set of freshly sterilized
instruments directly to the procedure area.
The STATIM 2000 is fully automatic. Simply select one of the
three sterilization programs and with a single touch of the keypad,
begin the cycle. An advanced microprocessor controls all functions
and maintains optimal sterilization conditions, from start to
finish.
SciCan's STATIM cassette sterilizers have a biological
effectiveness that has been proven in tests for hollow and solid
instruments at many internationally recognized institutes in Canada,
the United States, and Europe.
Dri-TecC – Convection heat drying
technology
The STATIM 2000 uses convection heat to dry
instruments by utilizing the remaining heat in the system after the
sterilization phase. Heat is captured and released into the
cassette, drying wrapped instrument loads in as little as 10
minutes.
  
Sterilization cycle description
chart
| Cycle |
Unwrapped |
Wrapped |
Rubber/Plastic |
| Sterilization time |
3.5 minutes |
10 minutes |
15 minutes |
| Sterilization Temp. |
135º C |
135º C |
121º C |
| Total
Cycle time |
6 minutes |
14 minutes |
20 minutes |
|
STATIM 5000 cassette autoclave
|
>Full Brochure and Specifications (PDF File in new window) |
STATIM 5000 benefits
- Ultra fast 9 minute unwrapped cycle
- 17.5 minute wrapped cycle
- Exceptional instrument turnover
- 15 minute Dri-TecR drying technology
- Single water use
- Aseptic transfer of instruments
- Reduced instrument investment
- Prolongs instrument life
|
The perfect blend of speed and capacity, the STATIM 5000 features
a cycle as fast as 9 minutes with a sterilization chamber
approximately three times the size of the 2000 model. This larger
capacity cassette provides rapid high volume throughput
sterilization with cycles up to four times the speed of common
conventional autoclaves. The STATIM’s one-touch keypad offers a
choice of four fully automated sterilization programs.
Aseptic transport
Similar to the STATIM 2000,
the STATIM 5000 also employs a removable cassette, allowing dental
practitioners to transport sets of freshly sterilized instruments to
the treatment rooms safely and aseptically.
Dri-TecR – Radiant heat drying
technology
The STATIM 5000 uses heat generated by the
sterilization cycle, which is ‘absorbed’ by unique drying plates
located in the sterilization chamber. Heat is transferred from the
drying plates directly to instruments resulting in accelerated, full
load drying in as little as 15 minutes.
SciCan's STATIM cassette sterilizers have a biological
effectiveness that has been proven in tests for hollow and solid
instruments at many internationally recognized institutes in Canada,
the United States, and Europe.
Sterilization cycle description chart
| Cycle |
Unwrapped |
Wrapped |
Rubber/Plastic |
Heavy duty unwrapped
|
| Sterilization time |
3.5 minutes |
6 minutes |
15 minutes |
6 minutes |
| Sterilization temp. |
134º C |
134º C |
121º C |
134º C |
| Total
cycle time |
9 minutes |
14 minutes |
24 minutes |
14 minutes |
|
 |
>Full Brochure and Specifications (PDF File in new window)
STATIM 7000 benefits
- 12 minute unwrapped cycle
- 15 minute wrapped cycle
- 12 minute Dri-TecS drying technology
- Internal water filtration system allows for tap water
- Sterilizes up to 10 pouched packages
- Holds two 8”x11” instrument management cassettes
- RFID seal technology
- Easy serviceability
- Removable water reservoir
|
Built for the highest turnaround efficiency, the STATIM 7000 is
the ultimate in speed and capacity. It exceeds the overall
throughput of most conventional autoclaves, making it the perfect
choice for any busy practice.
Cutting edge technology
Employing SciCan’s
proprietary filtration system, the STATIM 7000 reservoir can be
filled directly from the tap, eliminating the need to buy distilled
water.
The STATIM 7000 cassette is equipped with a Radio Frequency
Identification Device (RFID) tag to log the cycle data and alert you
in advance whenever the seals needs replacing.
Dri-TecS - Steam heat drying
technology
Using the most advanced technology available
in the industry today, the STATIM 7000 produces super heated steam
to dry instruments. The thermal energy (heat) is extracted from
steam and transferred directly to instruments, quickly evaporating
any residual moisture.
Sterilization cycle description chart
| Cycle |
Unwrapped |
Wrapped |
Rubber/Plastic |
| Sterilization time |
3.5 minutes |
3.5 minutes |
30 minutes |
| Sterilization temp. |
134º C |
134º C |
121º C |
| Total
cycle time |
12 minutes |
15 minutes |
37 minutes |
Accessories
01-110288S Cassette complete
01-110295S Cassette seal & O-ring kit
01-110296S
Cassette O-ring kit
01-110290S Cassette lid
01-110289S
Cassette tray
01-110301S Instrument rack for pouches
SCWF1
Water filter for tap water (single)
SCWF6 Water filter for tap
water (6 pack)
01-110293S Reservoir complete
01-110328S
Reservoir lid
01-110327S Reservoir seal kit
01-110506S Waste
bottle kit
01-110299S Waste & condenser bottle kit
Specifications
Unit size
|
L 605mm x W 561 mm x H 271 mm
L 23.8" x W 22.1" x H 10.7" |
|
Cassette external
dimensions
(includes handles) |
L 494 mm x W 243 mm x H 78 mm
L 19.4" x W 9.6" x H 3.1" |
Cassette internal
dimensions
|
L 347 mm x W 219 mm x H 64 mm
L 13.7" x W 8.6" H 2.5" |
Sterilization chamber volume
|
6.3 L / 1.66 gal. |
Weight without water
|
93 lbs / 42 kg |
| Electrical
rating |
208-240VAC, 50 / 60 Hz, 15
A |
Product number: ST16243
Product Price: US$6,120.00
Select
|
|
|
